SUNIX SER5037PH is a Universal PCI serial communication board that allows users to add or expand two RS-232 ports on a PC-based system. It supports +5 or +12VDC of power from each serial port via COM 1st and 9th pin output and is compatible with 32/64-bit PCI architecture supporting 3.3 and 5V Bus, allowing it to be installed in virtually any available PC and compatible with all major operating systems. SUNIX SER5037PH serial card supports most of the OS on the market, making it the best and most economical solution for commercial and industrial applications.
Sunix 5037PH Universal PCI Serial Board – with Power Output / 2 Port / RS-232 / High Speed
R706.00
– Expands 2 independent RS-232 serial ports with communication speeds up to 921.6Kbps
– High-speed SUN1989 16C950 compatible UART controller on-board
– Compliance with PCI 33MHz Ver. 3.0/2.3/2.2./2.1 specification
– Supports both 64-bit & 32-bit PCI bus slots and 3.3V & 5V power
– Provides RS-232 serial ports with +5 or +12 VDC power output via COM 1st or 9th pin
– On-chip hardware auto flow control to guarantee no data loss
– Built-in ± 15KV ESD protection for all serial signals meets IEC1000-4-2 standard
– Plug-n-Play, I/O address, and IRQ assigned by BIOS
– Certified by CE, FCC, RoHS, and Microsoft WHQL approval
– Support Microsoft Windows, Linux, and DOS
2 in stock
Brands |
Sunix |
---|
Features
– Expands 2 independent RS-232 serial ports with communication speeds up to 921.6Kbps
– High-speed SUN1989 16C950 compatible UART controller on-board
– Compliance with PCI 33MHz Ver. 3.0/2.3/2.2./2.1 specification
– Supports both 64-bit & 32-bit PCI bus slots and 3.3V & 5V power
– Provides RS-232 serial ports with +5 or +12 VDC power output via COM 1st or 9th pin
– On-chip hardware auto flow control to guarantee no data loss
– Built-in ± 15KV ESD protection for all serial signals meets IEC1000-4-2 standard
– Plug-n-Play, I/O address, and IRQ assigned by BIOS
– Certified by CE, FCC, RoHS, and Microsoft WHQL approval
– Support Microsoft Windows, Linux, and DOS
Technical Specifications
Serial Communication
– Interface: RS-232
– Controller: SUNIX SUN1989 (16C950 UART Compatible)
– Bus: Universal PCI 64/32bit 3.3V/5V PCI Ver 3.0, 2.3, 2.2, 2.1
– No. of Ports: 2-port
– IRQ & IO: Assigned by System
– FIFO: 128 bytes (Hardware)
– Signal: TxD, RxD, RTS, CTS, DTR, DSR, GND, 5V/12V/ DCD, 5V/12V/RI
– Baud rate: 50 bps to 921.6 Kbps
– Data bit: 5,6,7,8
– Stop bit: 1,1.5,2
– Parity: None, Even, Odd, Space, Mark
– Flow Control: None, Xon/Xoff, RTS/CTS
– Protection: ±15KV ESD protection for each signal Human Body Model (HBM), ±15KV IEC1000-4-2 Air Gap Discharge, ±8KV IEC1000-4-2 Contact Discharge
– PCB connector: DB9 Male
Driver Support
– Windows Client: XP / Vista / 7 / 8.x / 10 (X86/X64) / 11
– Windows Server: 2003 / 2008 / 2012 / 2016 / 2019 / 2022 (X64)
– Windows Embedded: XP Embedded / POSReady 2009 / POSReady / Embedded System 2009
– Linux: Linux 2.x / 3.x / 4.x / 5.x
– DOS: DOS
*UNIX: FreeBSD / QNX / SCO OpenServer / SCO UnixWare / Solaris
*IBM OS/2: WARP 3/WARP 4
Note:Â “*“Â marked as a project-supported operating system.Â
Regulatory Approvals
– Hardware: CE, FCC, VCCI, BSMI
– Software: Microsoft WHQL Windows, Windows Client: XP / Vista / 7 / 8.x / 10 (X86/X64) / 11, Windows Server: 2003 / 2008 / 2012 / 2016 / 2019 / 2022 (X64)
Environment
– Operation Temperature: 0 to 60°C (32 to 140°F)
– Operation Humidity: 5 to 95% RH
– Storage Temperature: -20 to 85°C (-4 to 185°F)
What's in the box
Sunix 5037PH Universal PCI Serial Board X1
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.